|
CS2004
- CONTINUITY TESTER CS2004
can be used as continuity tester in electrical circuits, as diode and
transistor tester (GO, NO-GO) having polarized terminals, or for resistance and
relay coils tester, having two different
working thresholds.
It is
protected for voltages under 60V ac/dc erroneously applied to its terminals.
Ask
more details...
CS2014 -
Programmable pulse generator This
instrument, fully programmable, can be used to analyze elements
subject to pulse signals.
It has three different working modes:
-
Continuous
generation of pulse train with programmed length and pause
-
Continuous
generation of pulse train with programmable number of pulses
-
Two
pulses generation on the two outputs with programmed length
Ask
more details...
CS2019 -
RELAY LIFE TESTER
CS2019
allows to check both electrical and mechanivcal life of relays,
showing the number of cycles performed.
It
is composed by 10 different and indipendent modules to perform 10
different measures simultaneously.
Ask
more details...
CS2021 -
CABLE TESTER
This
Tester is designed to check multipole cables easier.
You can check cables up to 64 conductors max. It is possible to enlarge CS2021
functionality doing two or more consecutive tests.
Ask
more details...
 CS5014 -
CABLE TESTER
CS5014
is an instrument able to performs comparison check of cables and
printed-circuit in relation to one
sample previously saved.
The
machine learning is fully automatic, so it is just enough to 'read' only
one time the sample under test. Then, whatever has been memorized
can be:
- immediately used for check operations
-
saved
for future uses
-
printed
for documentation
CS5014
is a modular system easy to upgrade, up to maximal configuration, and to
maintain.
It consists of one command unit and one or more(3 max) scanner units with 1024
points each.
Ask
more details...
|
