Actuators Option

On demand, CS6015 can be equipped with the option "Actuators", a series of 24 relay's contacts, program controlled, useful for driving automated testing fixtures.
(see application "telephone automatic testing" where CS8014 is replaced by CS6015).

Actuators Option must be installed if you request to drive ISDN-4 - ISDN Interface. 

CS123 - External Artificial Line

The European Regulations have cancelled the concept of artificial line, by replacing it with a, simple and more reproducible, low tolerance resistors. 

If rises the necessity to test telephone sets under different Regulations, that require a special artificial line, CS123 box resolves the problem. 
On demand, we can supply CS123 Artificial Line meeting different Country Regulations.

  Download PDF manual 

CS2037 - Din Expander

This device allows the connection of more than 2 acoustic devices to the CS6015. Normally, there are 2 din connectors for two Test Heads and two Sound Level Meters. 

By using the CS2037, you can connect up to four Test Heads.

ISDN-4 - ISDN Interface for CS8014/CS6015 

The Test System CS8014 "Automatic FFT telephone test System" was designed to test Telephone terminals for PSTN lines. 
The ISDN-4 Interface, allows the CS8014 to extend effectively toward the ISDN telephone terminals the functional testing. Especially it can operate on TE terminals (telephones) or on PABX connected through the S Bus.
Through the ISDN-4 interface connected to CS8014 Test Equipment will be possible to make the most important functional tests required by the ETSI -CTR8 Standard.

More information about ISDN-4

In order to read the PDF documents, you need to have Adobe® Acrobat® Reader 3.0 or above already installed on your computer. You can download Acrobat® Reader for free from Adobe's website.